Licensed & Bonded OregonOR CCB #263828WashingtonWA L&I #LEONSAG743ND
Leon's Automatic Gates & Security

Project · Video entry & intercoms

Cellgate video intercom replacement in Gladstone, OR

Photos, start to finish

Photo 1 of 4

  1. Old gate entry box on a post in front of a chain link fence in Gladstone, Oregon
    01Before Before: the old entry box on its post.
  2. Open gate intercom housing with wiring and circuit board, tools on the curb
    02In progress Wiring the new unit on site.
  3. New Cellgate video intercom on a post beside a chain link fence and shrubs
    03Finished After: a new Cellgate video intercom on the same post.
  4. Close view of a Cellgate gate intercom with camera, keypad and call button
    04Finished Close-up: camera, keypad, and call button.

Swipe, or use the arrows, to go step by step.

The job, start to finish

Where it started

The entry box at this driveway gate was aging out.

What we did

We removed it, mounted and wired a Cellgate video intercom on the same post, and opened the existing double swing gate from it before we left.

  • Old entry box removed
  • New Cellgate video intercom wired on site
  • Same post, same day

How it turned out

Visitors now reach a unit with a camera, a keypad, and a call button. Start to finish took about an hour and a half.

See it working

The gate opening after the new intercom went in.

More on this kind of job: read our guide, Keypad, intercom, or app entry.

Services on this job: Video entry & intercoms, Access control. More about our work in Gladstone.

Good to know

Questions we get about jobs like this

Will a video intercom work with my existing gate opener?

Almost always, yes. Intercoms trigger the gate through a dry-contact relay, and every mainstream operator (LiftMaster, DoorKing, Nice/Apollo, FAAC, Viking, Linear, HySecurity) has an input for exactly that. It wires in the same place a keypad would, so your remotes and existing entry devices keep working alongside it. The main question we check on-site is whether the operator's control board is healthy enough to be worth keeping.

Do you have to trench wire out to my gate?

Not always. If your gate already has conduit for the operator or a keypad, we can usually pull a network or low-voltage line through it. Where there's no path, options include a buried run, a point-to-point wireless bridge back to the house, or a cellular unit that needs only power at the gate. Wired PoE is the most reliable for video, so we quote that first when the distance is reasonable.

What happens when the power or internet goes out?

The gate itself follows its own rules: most residential operators have battery backup and a manual release, so you're never locked in. A cloud intercom needs internet to ring your phone, which is why we keep a keypad or fob reader as a local backup that works with no connection at all. For sites where uptime matters, we add a small UPS on the intercom and network gear so short outages pass unnoticed.

Get your free estimate

Picture this at your place? Call, or send the form. The estimate is free.

Call now